GENERAL DESCRIPTION

MAP LAB PLUS
SEMI-AUTOMATIC LABORATORY ANALYSER FOR CLINICAL CHEMESTRY, LATEX AND ENZYME ASSAY
CODE RM2060

DETAILED DESCRIPTION

MAP LAB PLUS
SEMI-AUTOMATIC LABORATORY ANALYSER FOR CLINICAL CHEMESTRY, LATEX AND ENZYME ASSAY
CODE RM2060

The Map Lab Plus analysers are interferential filter photometers, completely managed by microprocessors, that execute photometric measurements and elaborate them according to the corresponding programs.

In Map Lab Plus analyses can be performed either in cuvettes or in microwells through two separated optical groups. Various parameters can be inserted by the operator. In particular, the following determinations can be carried out:

- ABSORBANCE
- END-POINT (Concentration)
- KINETICS
- FIXED-TIME
- MULTISTANDARD (uo to 7 standards)
- QUALITATIVE
- EIA

The Map Lab Plus uses disposable macro and micro cuvettes (glass or plastic), with an optical path of 1 cm. Number 10 interferential filters are included in the instruments: 4 for microwells and 6 for the cuvettes. The selection of the interferential filter is automatic, with powered handling managed by a microprocessor. This characteristic makes reading easier and eliminates filter- selection errors that may occur in instruments with manual selection.
The instruments can be programmed by means of a keyboard: the required parameters are inserted by a 32-character alphanumeric display. This display also shows the state of the instrument, eventual errors or malfunction signals. The analytic results are directly displayed in the pre-set measuring units.

INSTRUMENT CHARACTERISTICS

OPTICS
The instrument’s optics is sophisticated: the light source is a halogen lamp (20 W) for the cuvette section of Map Lab Plus. The light beam is aligned by a quartz lens, allowing a high measuring accuracy even when reduced-volume cuvettes are used.
The optics of the micro-well section consists of a special lens-end krypton- filled lamp (2 W) and a sophisticated lens system that ensures a high reproducibility of the analysis. A high precision step motor allows an accurate positioning of the strip-holder inside the reading block.

INCUBATOR
A 10-position Dry Block Incubator is incorporated and can contain both square and cylindrical cuvettes. The temperature of the thermostat unit is equal to that of the cuvettes contained in it (37°C).

FLOW CELL
The Map Lab Plus analyzer has a one-way flow cell system that ensures low carry-over values even with limited sample volumes. Disposable macro and micro cuvettes (glass or plastic), with an optical path of 1 cm, can be used by simply removing the flow cell from the reading compartment and placing it in the right-side one.
The instrument can be equipped with 18 uL flow cell (optionally 80uL). The instrument can be programmed to use air gapin order to reduce the carry-over.

LANGUAGE
The instructions on the display can be selected from one of the following languages: English, Italian, German, French and Spanish. Furthermore, an additional language can be inserted upon customer’s request. For such operation, contact your nearest dealer.

RESULT DISPLAY
The instrument is provided with a 24-column thermal graphic printer; it can print the analytic results and their programming parameters and plot graphs in MULTI-STANDARD and KINETIC Tests.
The instrument is an OPEN system and is therefore completely programmable .

MEMORY
90 programs can be stored in the instrument. Qualitative, Kinetic, End-point, Fixed Time determinations can be inserted into the programs from 1 to 50 (except Multi-standard Tests). Analyses starting from 51 to 90 can be programmed for all methods (Multi-standard included).
By means of a sophisticated algorythm it is possible to execute a recalibration of a multi-standard analysis using only 2 standard. All the method parameters and the results are sent to a Serial Output (RS-232) situated on the back of the instrument. This allows the instrument to communicate with a PC: it is then possible to elaborate the results through this serial link.

SOFTWARE
A Data Management Software in a CD-ROM for Map Lab and Map Lab Plus is included with the instrument . This software communicates with the instrument by RS-232 Output and allows the user to maintain a database (as archive organized by session or by test) of the results. Moreover, it performs complete Quantitative and Qualitative Test calculations.

Biochemical Systems International Srl reserves the right to change specifications without prior notice.

TECHNICAL FEATURES

MAP LAB PLUS
SEMI-AUTOMATIC LABORATORY ANALYSER FOR CLINICAL CHEMESTRY, LATEX AND ENZYME ASSAY
CODE RM2060

OPERATING MODES
Operating modes Absorbance, End Point, Fixed-Time, Kinetic, Multistandard and Qualitative tests
FOR FLOW CELL
For Flow cell 18 µL
Typical working volume 500 µL
Min. working volume 350 µL
Carry Over less than 1%
Intake Peristaltic pump with programmable intake volume and air gap setting
FOR CUVETTE
Spectral range 320-690 nm
Filter wavelength 340-405-505-546-578-630 nm
Reagent volumes
In cuvette 1 ml (minimum) for macro-cuvette; 0.3 ml for micro-cuvette
FOR MICROWELL STRIP
Spectral range 320-690 nm
Filter wavelength 405-450-492-630 nm
Microwell strips type All types of 8-well strips
MEASURING SYSTEM
Reset Automatic
Measuring range from -0.200 to 3.000 O.D.
Photometric accuracy ±1% from 0 to 2.500 O.D.
Photometric linearity ±1% from 0 to 2.500 O.D.
Reproducibility CV < 1% @ 2.0 O.D.
Reading Monochromatic, Bichromatic
QC PROGRAMM
Sample Memory 30 samples survey for each test
Result Levey-Jennings plot
Statistical parameters CV, SD, Mean Value
Memory Up to 40 tests
High/Low flags Yes
Level 2 per test
GENERAL
ID Sample Selectable
Incubator 10 positions at 37°C; ± 0.2°C
Printer Built-in graphic printer with 24 columns
Power supply 220/110V, 50/60 Hz, switchable
Dimensions 40x53x17 cm
Weight 14.5 Kg

Biochemical Systems International Srl reserves the right to change specifications without prior notice.

RELATED REAGENTS

REAGENTS LINE FOR CLINICAL CHEMISTRY ANALYZERS
Clin Check Plus, Screen Master Plus, 2000 Evolution, Screen Master 3000, 3000 Evolution, MapLab, MapLab Plus

CODE REAGENT TYPE METHOD SAMPLE
HM3027 Albumin End-Point Serum, Plasma
HM3012 Alkaline Phosphatase Kinetic Serum, Plasma
HM3001 Alpha Amylase Kinetic Serum, Plasma
HM3004 Calcium End-Point Serum, Plasma
HM3006 Chloride End-Point Serum, Plasma
HM3007 Cholesterol End-Point Serum, Plasma
HM3022 Cholesterol HDL End-Point Whole Blood
HM3032 CK-MB Kinetic Serum, Plasma
HM3005 Creatine Kinase Kinetic Serum, Plasma
HM3008 Creatine Fixed Time Serum, Plasma
HM3011 Erythrocytes* Turbidimetric Whole Blood
HM3017 Gamma-GT Kinetic Serum, Plasma
HM3014 Glucose End-Point Serum, Plasma
HM3015 GOT Kinetic Serum, Plasma
HM3016 GPT Kinetic Serum, Plasma
HM3009 Hematocrit* Turbidimetric Whole Blood
HM3010 Hemoglobin* Colorimetric Whole Blood
HM3013 Inorganic Phosphorus End-Point Serum, Plasma
HM3023 Iron End-Point Serum
HM3030 Lactic Acid End-Point Whole Blood
HM3018 LDH Kinetic Serum, Plasma
HM3035 Magnesium End-Point Serum, Plasma
HM3019 Proteins End-Point Serum, Plasma
HM3003 Total Bilirubin End-Point Serum, Plasma
HM3020 Triglycerides End-Point Serum, Plasma
HM3002 Urea End-Point Serum, Plasma
HM3021 Uric acid End-Point Serum, Plasma
HM3024 WB Cholesterol* End-Point Whole Blood
HM3025 WB Glucose* End-Point Whole Blood
HM3026 WB Triglycerides* End-Point Whole Blood
HM3050 Control Serum - Normal
HM3051 Control Serum - Pathological

Notes:

Liquid reagents prefilled in single cuvettes, 24 determinations per pack.
* Pack complete with capillanes

Biochemical Systems International Srl reserves the right to change specifications without prior notice.

VETERINARY
BIOCHEMISTRY ANALYZER SEMI-AUTOMATIC
BIOCHEMISTRY ANALYZER AUTOMATIC