GENERAL DESCRIPTION

BLUE CARE

TECHNICAL FEATURES

BLUE CARE


METER
Measurement range
10-600 mg/dl (0.6-33.3 mmol/l) glucose ELECTRODES
Calibration
No coding
Power Source
2X3V lithium button cell, type CR 2032.
The battery can be used for approx. 1 year with 3 measurements per day (approx. 1000 measurements)
Switch On
Automatic Switch on/off by strip detection
Dimension
Length: 85 mm
Height: 50,5 mm
Width: 19,34 mm
Weight
49 g (incl. battery)
Indicator
LCD display
Climatic operating condition
Temperature limits: 10 to 40 °C
Humidity limits: 0% to 90% relative humidity (non-condensing)
Altitude limit: 3000 metres
Memory capacity
500 measured values with time and date
Interface for data processing
Connecting cable
Warranty of the instrument
3 years
Contents of the instrument box
1 meter, 1 lancing device, 1 bag of 10 sterile lancets, 1 vial of 10 glucose strips, 1 data-chip, 1 hardcase,1 user's manual, 1 rapid guide, 1 lancing device instructions


GLUCOSE STRIPS
Sample to be used
Fresh capillary whole blood
Minimum volume: 0,5 µl
Range of Measurement
10-600 mg/dl (0,6-33,3 mmol/l)
Averange time for reading
5 seconds
Storage conditions
5-30 °C
Table of results
Glucose below 10 mg/dL (0,6 mmol/L) = LO*
Glucose between 10 mg/dL (0,6 mmol/L) and 600 mg/dL (33,3 mmol/L) = the numerical result
Glucose above 600 mg/dL (33,3 mmol/L) = HI**
*Repeat the test.
**Such results mean that the glucose concentration in the sample is very elevated and it indicates a serious risk. Contact a physician immediately.
Normal Values at fasting 70-110 mg/dL (3,9-6,1 mmol/L)
Packaging
Boxes of 25, 50 pcs

HOW TO

BLUE CARE

HOW TO PERFORM THE TEST OF GLUCOSE
1. Check the number on the display
On the display will appear a number that should correspond to the one printed in the strip vial label.

2. Insert the strip
Insert the reagent strip of the parameter that you would perform.
The instrument will automatically switch on.

3. Blood aspiration
After performing the finger prick let the blood be aspirated the drop of blood.
The required volume is small.

4. Check the result
Check the result that appears on the display after short time.
The wide characters will help the operator to execute the test and to clearly read the results.

5. Ejection of used strips
After performing the test it is possible to eject automatically the strip by pressing the switch on the backside of the instrument in order to avoid contamination.
VETERINARY
BIOCHEMISTRY ANALYZER SEMI-AUTOMATIC
BIOCHEMISTRY ANALYZER AUTOMATIC